Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 
 

HAND HELD PRESSURE CUM VACCUM PUMP

 
DESCRIPTIONS
1. Lightweight hand held pressure cum vacuum pump.
2. Pressure & vacuum can be generated with fewer strokes by hand.
3. Generates pressure up to 30 Kg/cm2 / Bar.
4. Push setting for generating vacuum up to – 1 Kg/cm2 / Bar.
5. Top ¼” BSP (F) adopter for the Master gauge.
6. Side flexible tubing with ¼” BSP (F) adopter for gauges to be tested.
7. Side release knob for pressure & vacuum.
8. Side zero adjuster knob.
Accuracy : +/- 0.5% F.S.
 
SPARES
*Extension cable
*Adopters ¼” BSP(M) X ¼” BSP(F) - 1 No.
*Adopters ¼” BSP(M) X 3/8” BSP(F) - 1 No.
*Adopters ¼” BSP(M) X ½ ” BSP(F) - 1 No.
* Vacuum or Pressure select Push Knob - 1 No.
* Washers for ¼”, 3/8”, & ½” Connection
 
OPERATING INSTRUCTIONS
This is a pneumatic hand pump. Both pressure and vacuum can be measured. Put the master gauge on the front side of the pump where there is ¼” BSP female connection. On the side of the body there is a 1/4”bsp male connection with a cap. Remove the cap and fix the one side of the cable provided .Other side of the cable fix the gauge to be calibrated. Ensure all the connections are leak proof. Start pumping, When you reach the required pressure stop pumping. To set the gauge exactly use the big knob either clockwise or anti clock wise. To release the pressure use the small knob.
If you want to measure vacuum there is a black knob with a rod. Insert the rod in the hole where written push for vacuum.
 
   
Temperature Instruments Dial Thermometers - Chemical / Laboratory Glass Thermometers - Industrial Marine / Glass Thermometers- Electronic Temperature Indicators & Controller - Portable Temperature Indicator / Thermohygrometers - Digital Thermometer cum Hygrometer - RTD'S & Thermocouples - Thermocouple Probes For Portable Temperature Indicator - Extruders - Compensating Cables - Temperature Recorders - Temperature Switches - Temperature Indicator Crayons
Pressure Instruments Pressure Gauges - Manometers - Dead Weight Testers / Comparison Testers - Pressure Switches - Pressure Recorders - Digital Pressure Indicators / Controllers
Flow & Level Instruments Rotameter / Flow Meter - Level Gauges - Level Switches
Temp & Pressure Instruments Accessories Thermowell -  Pulsation Snubber - Needle Valve (Isolation Valve) - Manifolds Valve - Quick Fitting Adapters & Reducers - Ferrule Fittings - Syphon - Gauge Cock - Pulsation Dampener - Over Pressure protector (gauge saver)
Test & Calibration Calibration Certificate Traceable to National Standard - Temperature Calibration bath- Hand Held Pressure Cum Vacuum Pump - Hand Held Hydraulic Pressure Pump - Hand Held Low Pressure & Vacuum Pump - Hand held vaccum / pressure pump without digital pressure gauge - Digital Pressure Gauge - Digital Pressure Gauge Low Range - Dead Weight Vacuum Tester - Comparison Pressure Test Pump, Comparison Vacuum Test Pump - Dead Weight Pressure Tester
   
 
Home - About Us - Products - Clients - Certificates - Enquiry - Contact
 Designed & Hosted by : MID   Promoted by : GID