Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 
 
 

PRESSURE SWITCHES

 
Pressure Switchses PS Series
 
Pressure Switchses PS Series

 

• Sturdy Mechanism
• Triple Pole Cut-In /Cut Out
• Diapharagm Sensor

Series PS Pressure Switches are essentially meant for ON-Off pressure control applications such as air compressor or water pump to control their working between the minimu and maximum setting value, pressure switch contacts close an dstarts the motor.

A speciallycontoured diaphragm sense he change in pressure and actuates a triple pole contact switch,which enables direct switching of 3 phase motors.

The setpoint ( cut-out pressure) and resetpoint (cut-in pressure) area adjusted by a Range screw and differential screw.

A pressure relief valve to relieve the pressue locked at the compressor cylinder head is a available in Model PSU.

A hand lever is provided to lock the contacts in "OFF" position if-required. When set to "AUTO" position, the epressure switch intiates normal operation.

 
Enclosure Epoxy coated MS Enclosure with Engineering Plastic Cover Weartherproof to IP:44
Sensor Nitrile Diaphragm (Buna-N) fabric interlaid
Ranges 1-4 or 2.5 -9.5 or
Switching 3 pole(TPST) contacts, normally closed
  Rating 9A, AC-3 phase, 500V; 6A 220V DC
Differential Widband, adjustable
Ambient Temp. 0 to 70°c
Max. Process Temp. 100°c
Connections  
Process Pressure 1/2" BSP F
Pr. Relief Valve
(Model PSU only)
1/4" Flare connection with nut
Electrical Entry Suitable for 6 to 14 mm dia cable
Mounting Direct-on-line
 
ORDERING MATRIX
 
 
 
 

Pressure Switches Type IPS

 
Pressure Switches Type IPS
 
• Microswitch Actuation
• Reduced Overall Size
• Improved Mechanism
 

Operating Function

Industrial Pressure Switch (IPS) is an electromechanical device that senses changes in pressure and provides electrical contact closures at predetermined pressure values.

A hydrautically formed seamless Phosphor Bronze bellows senses the changes in pressure and actuates a snap acting microswitch at desired pressure settings. The cut in and cut out points are adjustable over the entire range.

IPS Pressure Switch may be used to activate an alarm or may directly control the process. In an alarm application. the switch protects valuable equipment by an audible signal. In direct control application. the switch can be linked electrically to other equipmeny, for trip or interlock.

Application

IPS Pressure Switches are mean for use with oil, water, air, steam and other non-corrosive pressure mediums. They are NOT designed for use with any refrigerant gases.

IPS Pressure Switches are used on a wide variety of applications which include

  • Pumps Controls
  • Compressors
  • Turbines
  • Lubrication Systems
  • Condensers
  • Process Boilers
  • Controls in conjunction with Solenoid Valves
 

Settings

The adjustments are conveniently located on top surface of the control. The switch can be set to operate at desired pressure values by adopting the following proceduce.

Decide the maximum pressure at which the switch has to changeover.
Decide the differential at which the control has to oerate.
First set the maximum changeover pressure on the range scale. This can be done by removing the knob and turning the range spindle.
Check the maximum and minimum changeover pressures with a master gauge.

 

The electricak continuty is maintained between contacts NC & COM under nornal conditions. The contacts changeover to NO & Com on rise of pressure to present value.
Since the electrical contact is of SPDT type, it can be used for reserve applications also.
Coloured wires are used for NO.NC and COM for easy identification.

Mounting
The presssure control can be mounted on a wall or panel by means of mounting holes provided at the back of the device.

 
General Specification
 
Enclosure Plated Steel with ABS cover to IP:33 as per IS:13947 (Part-I), 1993
Sensing Element Photoshop Bronze Bellows
Switching Instrument Quality snap acting microswitch-SPDT contacts
Switch Rating 15A 250V AC
Repeatability / Accuracy + 2% FSR
Ambient Temperature 70° c
Process Temperature 100° c max
Prcess Connection 1/4" BSP (F)
Cable Entry Suitable for Cable dia upto 14 mm OD
Mounting Surface/Panel
 
 

Pressure & Temperature Switch RT Series

 
Pressure & Temperature Switch RT Series  Pressure & Temperature Switch RT Series
 
• Wide Adhustable Range
• Adjustable on-off differential
• In built study snap action switch
• Repeatability +1%
• Weatherproof Enclosure
 

RTSeries of Pressure Switches utilize seamless bellows as the sensing elemenat. Slimplicity of design asn ease of installation has been stressed for reliable use, even in applications where shock and vibrations asre present. The sending elemant can be used for a variety of process fluids.

 

For corrosive media, viscous fluids and slurries, RT pressure switches perform well in conjuction with diapharagm type chemical seals.

RT series of Temperature Switches have a vapour fiiled thermostatic element, which consist of a sensing bulb, capillary tube and a bellows elemant. The entire element contains a charge which reacts to temperature variations at the sensing bulb, so that pressure on the bellows increases on rising temperature. The bellows movemenet due on this increase in pressure is utilised to operate the switch.

Available in various ranges to control temperature upto 300°c, with high over temperature limits. RT temperatures switches are available with a selection of capillary lengths. The vapour filled system features small bulb sizes masking installation easy.

Wherever, bulb of temperature switch is exposed to pressure, corrosive fluid or high velocity, a thermowell must be used. Thereaded of flanged thermowells, with length and materials as per aaplication requirement are available.

RT series switches have an excellent record backed by our responsice manufacturing facility. Special appliation assistance always available.

Applications include pumps, compressors, filters,evaporates, heat exchangers, lubrication systems, hydraulic systems, marine equipmeny, heating and air conditioning equipment, turbines, generators, circuit-breakes etc.

 
 
 
   
Temperature Instruments Dial Thermometers - Chemical / Laboratory Glass Thermometers - Industrial Marine / Glass Thermometers- Electronic Temperature Indicators & Controller - Portable Temperature Indicator / Thermohygrometers - Digital Thermometer cum Hygrometer - RTD'S & Thermocouples - Thermocouple Probes For Portable Temperature Indicator - Extruders - Compensating Cables - Temperature Recorders - Temperature Switches - Temperature Indicator Crayons
Pressure Instruments Pressure Gauges - Manometers - Dead Weight Testers / Comparison Testers - Pressure Switches - Pressure Recorders - Digital Pressure Indicators / Controllers
Flow & Level Instruments Rotameter / Flow Meter - Level Gauges - Level Switches
Temp & Pressure Instruments Accessories Thermowell -  Pulsation Snubber - Needle Valve (Isolation Valve) - Manifolds Valve - Quick Fitting Adapters & Reducers - Ferrule Fittings - Syphon - Gauge Cock - Pulsation Dampener - Over Pressure protector (gauge saver)
Test & Calibration Calibration Certificate Traceable to National Standard - Temperature Calibration bath- Hand Held Pressure Cum Vacuum Pump - Hand Held Hydraulic Pressure Pump - Hand Held Low Pressure & Vacuum Pump - Hand held vaccum / pressure pump without digital pressure gauge - Digital Pressure Gauge - Digital Pressure Gauge Low Range - Dead Weight Vacuum Tester - Comparison Pressure Test Pump, Comparison Vacuum Test Pump - Dead Weight Pressure Tester
   
 
Home - About Us - Products - Clients - Certificates - Enquiry - Contact
 Designed & Hosted by : MID   Promoted by : GID